763.420.4527
Residential synthetic ice rink with obstacles

Are support beams or other obstacles stopping you from adding synthetic ice to your home or commercial space? it shouldn’t! We work with several clients that are hesitant to add synthetic ice due to support beams, “jut-outs”, or odd shaped exterior dimensions, in their potential space. At KwikRink, we have the capabilities to custom cut your synthetic ice rink to exact specifications. As a wise man once said, there is always a way! Often times, we find that these obstacles work as training aids, creating better hands and agility.

Support Beams

With proper on-site dimensions, we can have our expert programmers devise a CAD tailored to your space. When working with support beams, it helps to work off of two adjacent walls to nail down exactly where the support pole(s) line up. The goal is to always have the supports lineup on the seam of the synthetic ice panels. This allows the client to make a nice and neat cut around the support pole, without wasting excess material.

Spaces with “jut-outs”

In any scenario where a room has portions that “jut-out”, have no fear, as there are easy ways to work around these obstacles, as well. Any small obstacle like this is best dealt with on-site for the tidiest cut possible. If necessary, we will also line this up on a seam of two connecting panels, but often times we do not need to do this. We recommend using a skilsaw with a 24 tooth blade for cutting around the obstacle. The synthetic ice will cut like butter – no problem!

Odd Shaped Rooms (Exterior)

This has been discussed in other blog posts, and you can click here for more information. When filling a hard room in wall-to-wall, it is quite rare to find that some amount of customization is not needed. Our machines are very precise and can save you a lot of money in a custom space. We can send you your rink with precision cuts to the exact specifications of your room. All you will need to do is simply connect the panels, like a giant puzzle! Most home synthetic ice rinks can be installed in 20-30 minutes depending upon the amount of on-site cutting involved.

Don’t let on-site obstacles stop you from your dream synthetic ice space. These types of obstacles are common, and can potentially be seen as a plus rather than a negative!

 

 

 

Synthetic Ice Layout

Synthetic ice layouts are extremely important, as each client has different needs. We will touch on “panel loss” vs exact customization in this article post. Regardless if you digest the below information or not, KwikRink Synthetic Ice is here to determine the best route for the client with their goals and budget in mind.

KwikRink’s standard synthetic ice sheet has exterior dimensions of 95″ x 48″ (#1 cut), typically yielding 94″ x 47″. This is by design, so that the panels can be connected every which way. Because they are so close to 8′ x 4′, we go by these increments for simplicity, and many of the quote inquiries we get, also follow this guideline. The dovetail pattern is 1″ deep, and when connected, this causes the loss of 1″ every 4′ of connection. This is called “Panel Loss” or “PL” for short. If i am losing you here, it will be simplified below…

Examples using all #1 cuts:

40′ x 20′ PL = 39’3″ x 19’8″ (25 Panels)

32′ x 16′ PL = 31’5″ x 15’9″ (16 Panels)

24′ x 12′ PL = 23’7 x 11’10” (9 Panels)

Why #1 cuts? 

Using the default cut panels is the best bang for your buck when it comes to choosing a synthetic ice rink layout. You will have no charges for custom cutting, no excess scrap, and be able to rotate all panels in your synthetic ice rink to expand the lifespan. Anything that is custom cut is often locked into that specific spot on the rink. #1 cuts can be used for synthetic ice rinks that do not need to fill in an exact space (think wall to wall – inside). Outdoor rinks and open areas work the best.

When is Custom cutting is needed?

For commercial or residential synthetic ice rinks that need EXACT dimensions, often times custom cutting is required, as the #1 cuts natural dimensions will not get you there. KwikRink specializes in custom cut synthetic ice solutions. It is also necessary with custom markings (lines, creases, circles, dots, etc).

When we say Exact, what do we mean?

We truly mean exact. If your space is 24’6 1/2″ x 15’3 1/4″, KwikRink can do it with world-class precision machining. Often times, residential basements that are interested in adding synthetic ice for home training have pole supports to work around in the area. We can design a layout with custom cut panels, so that the seams of a panel line up at the pole. This allows for the easiest cut around the pole.

In conclusion…

When it is not necessary to have exact dimensions, “panel loss” is the way to go. This will get you to 8′ x 4′ multiples minus a few inches each way, depending upon how big the rink is. Exact is they way to go when…well you need exact dimensions to fit into a hard space. Get your quote today!